Hyundai
Creta
Current 1.5 MPi petrol
Clear. Confirmed. Ready.
This Hyundai Creta configuration is E20-ready.
The configuration and model years shown here are covered by the manufacturer or official documents available on this page.
Exact configuration
What this answer covers
- Model years
- 2024-01 to present
- Variant
- Current 1.5 MPi petrol
- Fuel
- Petrol
- Transmission
- MT, IVT
- Engine
- 1.5 MPi petrol
- Tank capacity
- 50 litres
- Tyre pressure
- 205/65 R16: 33/33 psi · 215/60 R17: 33/33 psi · 215/55 R18: use driver's pillar label
Expected mileage
A practical E20 estimate for your car today.
Owner essentials
Official owner guidance for this car.
Apply a transmission-specific item only to the gearbox named on the card. Tyre pressures must also match the fitted tyre size and load condition.
205/65 R16: 33/33 psi · 215/60 R17: 33/33 psi · 215/55 R18: use driver's pillar label
R16 and R17 values are the manual's normal-load cold pressures. Current R18 trims use the recommended pressure on the driver's-side centre-pillar label.
10,000 km or 12 months
Severe use for the 1.5 MPi: 7,500 km or 6 months
No routine check or service
Applies to MTSevere use: replace every 120,000 km
No routine check or service
Applies to IVTSevere use: replace every 90,000 km
Mileage guidance
Build your own three-fill baseline
Mileage depends on route, load, traffic, AC use, tyres and maintenance.
Official documents
Manufacturer manuals, brochures and statements
Creta and Creta N Line Owner's Manual, January 2024 to present
Hyundai Motor India Limited
Creta current brochure
Hyundai Motor India Limited
19 July 2026
Share an updated manufacturer document